AEG FM2500DD-A, User Manual

Page: 18 / 32

Installation Instructions
18
Installing next to a gas appliance
1
Important: The appliance must not be built in between two gas appliances.
1
Important: If a gas appliance is installed next to the down draught extractor, the
down draught extractor may only extract air on the opposite side. Therefore the
fin nearest the gas appliance must be removed and the supplied cover must be
fitted.
To remove the fin
1. Switch on down draught extractor and
move to the top position.
2. Switch off fan level.
3. Press in and remove the springs of the fil
ter.
4. Take filter out.
5. Remove upper casing and place on some
thing soft.
6. Remove the two screws which hold the fin.
7. Remove single screw that holds the lever
that closes the fin.
8. Remove the fin.
To fit cover
1. Lay cover on the glass ceramic.
2. Position cover on the upper housing.
3. Mark four holes on the upper casing. Use
cover as a template.
4. Remove cover and drill the four holes in
the upper casing.
5. Remove adhesive film.
6. Press cover in position on the upper casing.
7. Affix cover with the blind rivets supplied.
8. Install filter, springs and upper casing in re
verse order.