background image

7

7

after used.
To obtain the longest possible battery life remove the battery pack from 
the charger once it is fully charged.
For battery pack storage longer than 30 days:

•  Store the battery pack where the temperature is below 27°C and 

away from moisture.

•  Store the battery packs in a 30% - 50% charged condition.
•  Every six months of storage, charge the pack as normal.

TRANSPORTING LITHIUM BATTERIES

Lithium-ion batteries are subject to the Dangerous Goods Legislation 
requirements.
Transportation of those batteries has to be done in accordance with 
local, national and international provisions and regulations.

 

The user can transport the batteries by road without further 
requirements.

 

Commercial transport of Lithium-Ion batteries by third parties is 
subject to Dangerous Goods regulations. Transport preparation and 
transport are exclusively to be carried out by appropriately. trained 
persons and the process has to be accompanied by corresponding 
experts.

When transporting batteries:

 

Ensure that battery contact terminals are protected and insulated 
to prevent short circuit.

 

Ensure that battery pack is secured against movement within 
packaging.

 

Do not transport batteries that are cracked or leak.

Check with forwarding company for further advice.

BATTERY PACK PROTECTION

The battery pack has overload protection that protects it from being 
overloaded and helps to ensure long life. Under extreme stress the 
battery electronics switch off the battery-lamp automatically. To restart, 
switch the battery-lamp off and then on again. If the battery-lamp does 
not start up again, the battery pack may have discharged completely. In 
this case it must be recharged in the battery charger.

MAINTENANCE

The ventilation slots of the machine must be kept clear at all times. 
Use only AEG accessories and AEG spare parts. Should components 
need to be replaced which have not been described, please contact one 
of our AEG service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the 
Article No. as well as the machine type printed on the label and order the 
drawing at your local service agents or directly at: 

Techtronic Industries Australia Pty Ltd
PO Box 1065 
Mount Waverley VIC 3149 
Tel. no. 1300 234 797 
Australia
Techtronic Industries N.Z. Limited
PO Box 12-806 
Penrose AUCKLAND 1642 
Tel. no. 0800 234 797 
New Zealand

SYMBOLS

Safety alert

Regulatory Compliance Mark (RCM). Product meets 

applicable regulatory requirements.

Please read the instructions carefully before starting the 

machine.

Class III protection

Do not stare at the operating light source.

Do not dispose of electric tools together with household 

waste material. Electric tools and electronic equipment 

that have reached the end of their life must be collected 

separately and returned to an environmentally 

compatible recycling facility.

Summary of Contents for FL182









Reviews: