3. To adjust the rear height, turn the
middle screw counterclockwise to
raise the appliance.
14.3 Adjusting the level of the
appliance
Correct levelling of the appliance allows
the door to close and seal properly.
If the door does not close correctly, raise
or lower the adjustable feet to level the
appliance.
After adjusting the level of the appliance,
assemble the adjustable plinth on the
appliance.
Once the installation is completed, make
sure that the bottom of the adjustable
plinth is aligned with the floor.
14.4 Installing the appliance
under a kitchen counter or to
adjacent units
The appliance has 6 fixing points:
• 2 external fixing points (2 br
screws)
• 4 internal fixing points (4 s
screws)
Use the 2 external fixing points when
installing the appliance under a kitchen
counter or to adjacent units or if the
opening for the appliance is greater than
600 mm.
Use the 4 internal fixing points if the
opening is 600 mm.
A combination of both fixing methods can
be used if required.
14.5 Using the 2 external
brackets
1. Install the brackets in the slots on the
top of the appliance.
This operation must be done before
the appliance is positioned under the
counter.
D
D
2. Install the appliance under the
counter. Make sure that the
appliance is levelled properly.
3. Fix the brackets (on the top or on the
side) with the screws supplied. Make
sure that the screws are tight.
A
A
A
A
14.6 Using the 4 internal
fixing points
1. Install the appliance under the
counter. Make sure that the
appliance is levelled properly.
ENGLISH
25