temperature of the water as well as wash
time. The option operates within the
designated area in the lower basket.
SprayZone is suitable for dishwashing
items with stubborn soil, e.g. pots, pans
and casserole dishes.
CAUTION!
Make sure that the items
placed in the SprayZone
area do not block the upper
spray arm.
How to activate SprayZone
Press Option until the indicator is on.
The display shows the updated
programme duration.
7. SETTINGS
7.1 Programme selection
mode and user mode
When the appliance is in programme
selection mode, you can set a
programme and enter user mode.
Settings available in user mode:
• The level of rinse aid according to the
required dosage.
• Activation or deactivation of the
AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
flashes and the display shows the
programme duration.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold simultaneously Delay
and Option until the appliance is in
programme selection mode.
How to enter user mode
Make sure the appliance is in
programme selection mode.
To enter user mode, press and hold
simultaneously Delay and Option until
the indicators
and
flash
and the display is blank.
7.2 The rinse aid level
The rinse aid helps to dry the dishes
without streaks and stains. It is
automatically released during the hot
rinse phase.
You can set the released quantity of
rinse aid between level 1 (minimum
quantity) and level 6 (maximum quantity).
Factory setting: level 4.
When the rinse aid chamber is empty,
the rinse aid indicator is on, notifying to
refill rinse aid. If the drying results are
satisfactory while using multi-tablets only,
you can deactivate the dispenser and the
indicator. However, for the best drying
performance, always use rinse aid and
keep the rinse aid indicator active.
To deactivate the rinse aid dispenser and
indicator, set the level of rinse aid to 0.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press Program.
• The indicator
still flashes.
• The remaining indicators are off.
• The display shows the current
setting: e.g.
= level 4.
2. Press Program repeatedly to change
the setting.
3. Press the on/off button to confirm the
setting.
7.3 AirDry
AirDry improves the drying results with
less energy consumption. The appliance
ENGLISH
11