A1
A2
2.
To disassemble the filter (
A
), pull
apart (
A1
) and (
A2
).
3.
Remove the filter (
B
).
4.
Wash the filters with water.
5.
Put the filter (
B
) to its initial position.
Make sure that it assembles correct-
ly under the two guides (
C
).
6.
Assemble the filter (
A
) and put it in-
to position in filter (
B
). Turn it clock-
wise until it locks.
An incorrect position of the filters
can cause bad washing results
and damage to the appliance.
9.2
Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clog-
ged, remove remaining parts of soil with
a thin pointed object.
9.3
External cleaning
Clean the appliance with a moist soft
cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning
pads or solvents.
10.
TROUBLESHOOTING
The appliance does not start or it stops
during operation.
Before you contact the Service, refer to
the information that follows for a solu-
tion to the problem.
With some problems the display
shows a message.
Display
Problem
Attention: no intake of water possible.
Please ensure the tap is not closed or
blocked.
The appliance does not fill with wa-
ter.
Attention: water is not draining. Please
ensure the drain tube is not attached
wrongly.
The appliance does not drain the wa-
ter.
Attention: The antiflood system has
been activated.
The anti-flood device is on.
36 www.aeg.com
Summary of Contents for FAVORIT 99025 IM0P
Page 79: ...DEUTSCH 79 ...
