Make sure that there is detergent
in the detergent dispenser be-
fore you start a new programme.
At the end of the programme
An intermittent acoustic signal operates
and the display shows a message.
1.
Press the on/off button to deactivate
the appliance.
2.
Close the water tap.
If you do not press the on/off
button, the
AUTO OFF
function
automatically deactivates the ap-
pliance after some minutes. .
This helps to decrease the ener-
gy consumption
Important
• Let the dishes become cold before
you remove them from the appliance.
Hot dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and
on the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.
8.
HINTS AND TIPS
8.1
The water softener
Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these miner-
als.
The dishwasher salt keeps the water
softener clean and in good conditions. It
is important to set the right level of the
water softener. This makes sure that the
water softener uses the correct quantity
of dishwasher salt and water.
8.2
Using salt, rinse aid and
detergent
• Only use salt, rinse aid and detergent
for dishwasher. Other products can
cause damage to the appliance.
• The rinse aid helps, during the last
rinsing phase, to dry the dishes with-
out streaks and stains.
• Combi detergent tablets contain de-
tergent, rinse aid and other added
agents. Be sure that these tablets are
applicable to the water hardness in
your area. Refer to the instructions on
the packaging of the products.
If you want to use these tablets out of
the applicable water hardness, you
must also use dishwasher salt. First ac-
tivate the Multitab option, then adjust
the water softener to the water hard-
ness in your area and use dishwasher
salt.
• Detergent tablets do not fully dissolve
with short programmes. To prevent
detergent residues on the tableware,
we recommend that you use the tab-
lets with long programmes.
Do not use more than the correct
quantity of detergent. Refer to
the instructions on the detergent
packaging.
8.3
What to do if you want to
stop using the combi
detergent tablets
1.
Set the water softener to the highest
level.
2.
Make sure that the salt container and
the rinse aid dispenser are full.
3.
Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4.
Adjust the water softener according
to the water hardness in your area.
5.
Adjust the released quantity of rinse
aid.
8.4
Loading the baskets
Refer to the supplied leaflet with
examples of the load of the bas-
kets.
34 www.aeg.com
Summary of Contents for FAVORIT 99025 IM0P
Page 79: ...DEUTSCH 79 ...