AEG FAVORIT 88002, User Manual

Page: 12 / 28

Manual adjustment
Turn the water hardness dial to the position 1 or
2 (refer to the table).
Electronic adjustment
1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold the Delay touchpad and the Start touchpad at the same time until
the programme indicators AUTO, PRO and SILENT flash.
4. Release the Delay touchpad and the Start touchpad.
5. Press the Program touchpad,
• The programme indicators PRO and SILENT go off.
• The programme indicator AUTO continues to flash.
• The display shows the setting of the water softener (example:
= level 5).
6. Press the Program touchpad again and again to change the setting.
7. Deactivate the appliance to confirm.
If the water softener is set electronically to the level 1, the salt indicator stays off.
USE OF DISHWASHER SALT
How to fill the salt container
1. Turn the cap counterclockwise and open
the salt container.
2. Fill the salt container with 1 litre of wa -
ter (only for the first time you fill with
salt).
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is correct that water comes out from the salt container when you fill it with salt.
12 Use of dishwasher salt