WARNING!
• The mains cable is in the double
-
walled inlet hose. Do not immerse the water inlet hose
or the safety valve in water.
• Do not attempt to shorten the inlet hose.
• If the water inlet hose or the safety valve is damaged, immediately turn off the power
and remove the mains plug from the mains socket.
• Only a qualified Service Engineer can replace the water inlet hose with safety valve.
WARNING!
Dangerous voltage
Water drain hose
The highest point of the drain hose must be no more than 600 mm from the floor and must
have a continuous fall to the plumbing connection.
The drain hose can be lengthened using additional lengths and connectors. These must be
purchased from Electrolux Spare Parts. The extension length must not exceed 2 metres.
The drain hose must be free of obstructions.
Remove the sink plug when the appliance drains the water to prevent that the water goes
back into the appliance.
If you connect the water drain hose to a trap spi-
got under the sink, remove the plastic membrane.
If you do not remove the membrane, remaining
food can cause a blockage in the drain hose spi-
got.
The appliance has a security feature to prevent
dirty water going back into the appliance. If, the
spigot of the sink has a 'non
-
return valve', this
valve can cause the appliance to drain incorrectly.
Remove the non
-
return valve.
Water connection
25
Summary of Contents for FAVORIT 77000
Page 1: ...FAVORIT 77000 EN DISHWASHER USER MANUAL ...
Page 31: ...31 ...