AEG FAVORIT 77000, User Manual, Page: 24 / 32

3. Lift the worktop and move it from the
front slots (3).
4. Level the appliance using the adjustable
feet.
5. Install the appliance under the kitchen
counter. Be careful not to bend or
squash the water hoses and the mains
cable.
WATER CONNECTION
Water inlet hose
Connect the inlet hose to a water tap with an external BSP thread spout of 3/4”.
For best washing performance it is recommended to connect the appliance to a cold water
supply.
Energy savings can be made by connecting the appliance to a Solar water system and using
economy options, however the water temperature must not exceed 60 °C.
Once connected the inlet hose to the water tap, turn the tap on and check that there are
no leaks.
Inlet water supply
• Water pressure: 800 kPa max - 50 kPa min.
• Water flow rate 10 L / minute min.
• If water pressure is in excess of 800 kPa, a pressure reducing valve should be used. Check
for leaks.
• If water temperature is in excess of 60 °C, a tempering valve should be used. Check for
leaks.
CAUTION!
Always use new hoses when you connect the appliance to the water mains. Old hoses must
not be used. The water inlet hose must be examined at an interval of twelve months for
deterioration and replaced if necessary.
The water pressure must be in the limits, refer to 'Technical data'.
Make sure that the local water authority gives you the average mains pressure in your area.
Make sure that the water inlet hose is not bent or squashed.
Fit the hose nut correctly to prevent water leaks.
CAUTION!
Do not connect the appliance to new pipes or pipes that have been not used for a long
time. Let the water run for some minutes, then connect the inlet hose.
The water inlet hose is double - walled and has an inner mains cable and a safety valve. The
water inlet hose is under pressure only while the water is running. If there is a leak in the
water inlet hose, the safety valve interrupts the running water.
Be careful when you install the water inlet hose.
24 Water connection