manualshive.com logo in svg

AEG FAVORIT 77000, User Manual, Page: 13 / 32

Share
Download
AEG FAVORIT 77000 User Manual Download Page 13

Different brands of detergent dissolve in different times. Some detergent tablets do not

have the best cleaning results during short washing programs. Use long washing programs

when you use detergent tablets to fully remove the detergent.

Use of rinse aid

CAUTION!

Only use rinse aid specified for dishwashers.

Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liq-

uid detergent). This can cause damage to the appliance.

Rinse aid makes it possible to dry the dishes without streaks and stains.

Rinse aid is automatically added during the last rinsing phase.

Follow these steps to fill the rinse aid dispenser:

Filling with rinse aid

1. Press the release button 

6

 to open the lid 

5

 of the rinse aid dispenser.

2. Fill the rinse aid dispenser 

3

 with rinse aid. The mark 'max' shows the maximum level.

3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam during

the washing program.

4. Close the rinse aid dispenser. Press the lid until it locks into position.

Adjusting the rinse aid dosage

Factory set: position 3.

You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (highest

dosage).
Turn the rinse aid selector 

4

 to increase or reduce the dosage.

Wash hands to remove any residue of rinse aid from skin.

MULTITAB FUNCTION

The multitab function is for combi detergent tablets.

These tablets contain agents as detergent, rinse aid and dishwasher salt. Some types of tab-

lets can contain other agents.

Be sure that these tablets are suitable for the water hardness in your area (refer to the in-

structions on the packaging of the products).

The multitab function deactivates the flow of rinse aid and salt.

The multitab function deactivates the indicators of salt and rinse aid.

The program duration can increase if you use the multitab function.
Activate or deactivate the multitab function before the start of a washing program. You

cannot activate or deactivate the function while a washing program operates.

Before the start of a washing program, always make sure that the multitab function is ac-

tive.

Multitab function

13

Summary of Contents for FAVORIT 77000

































Reviews:

No comments