Malfunction
Fault code
Possible cause
Possible solution
Blow out fuse in the
household fuse box.
Replace the fuse.
The delay start is set.
If you want to cancel
the delay start, refer to
'Select and start a
washing programme'.
After the check, switch on the appliance. The programme continues from the point of
interruption.
If the malfunction shows again, contact the service centre.
If the display shows other fault codes, contact the service centre.
The necessary data for the service centre is on the rating plate.
We recommend that you write the data here:
Model (MOD.)
....................
Product number (PNC)
....................
Serial number (S.N.)
....................
The washing results and drying results are not satisfactory
Problem
Possible cause
Possible solution
The dishes are not clean.
The selected washing pro
-
gramme was not applicable for
the type of load and soil.
Make sure that the washing
programme is applicable for the
type of load and soil.
The baskets were not loaded
correctly, water did not touch
all surfaces.
Load the baskets correctly.
The spray arms could not turn
freely because of incorrect ar
-
rangement of the load.
Make sure that an incorrect ar
-
rangement of the load does not
cause a blockage of the spray
arms.
The filters are dirty or not as
-
sembled and installed correct
-
ly.
Make sure that the filters are
clean and correctly assembled
and installed.
The quantity of detergent was
not sufficient or missing.
Make sure that the quantity of
detergent is sufficient.
Limescale particles on the
dishes.
The salt container is empty.
Fill the salt container with dish
-
washer salt.
Incorrect water softener ad
-
justment
Adjust the water softener.
The salt container cap is not
closed correctly.
Make sure that the salt con
-
tainer cap is closed correctly.
There are streaks, milky stains,
or a bluish layer on glasses and
dishes.
Rinse aid dosage is too high.
Decrease the rinse aid dosage.
What to do if…
21