If the holes in the spray arms become clogged, remove remaining parts of soil with a cocktail
stick.
To clean the external surfaces
Clean the external surfaces of the appliance and control panel with a damp soft cloth. Only
use neutral detergents. Do not use abrasive products, scouring pads or solvents (e.g. ace
-
tone).
What to do if…
The appliance does not start or stops during operation.
First try to find a solution to the problem (refer to the chart). If not, contact the service
centre.
Malfunction
Fault code
Possible cause
Possible solution
The appliance does not
fill with water.
The display shows
The water tap is
blocked or is furred
with limescale.
Clean the water tap.
The water pressure is
too low.
Contact your local wa
-
ter authority.
The water tap is closed. Open the water tap.
The filter in the water
inlet hose is blocked.
Clean the filter.
The connection of the
water inlet hose is not
correct.
Make sure that the
connection is correct.
The water inlet hose is
damaged.
Make sure that the wa
-
ter inlet hose has no
damages.
The appliance does not
drain the water.
The display shows
There is a blockage in
the sink spigot.
Clean the sink spigot.
The connection of the
water drain hose is not
correct.
Make sure that the
connection is correct.
The water drain hose is
damaged.
Make sure that the wa
-
ter drain hose has no
damages.
The anti-flood device
operates.
The display shows
Close the water tap
and contact the serv
-
ice centre.
The programme does
not start.
The appliance door is
open.
Close the door correct
-
ly.
The mains plug is not
connected in.
Put in the mains plug.
20
What to do if…