Water hardness
Water hardness adjustment
°dH
°TH
mmol/l
Clarke
manually
electronically
< 4
< 7
< 0,7
< 5
1
2)
1
2)
1) Factory position.
2) No use of salt is necessary.
You must adjust the water softener manually and electronically.
Manual adjustment
Turn the water hardness dial to the position 1 or 2
(refer to the chart).
Electronic adjustment
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold function buttons B and C until the indicator lights of function buttons
A, B and C start to flash.
4. Release function buttons B and C.
5. Press function button A.
– The indicator lights for function buttons B and C go off.
– The indicator light for function button A continues to flash.
– The display shows the current adjustment.
Example: the display shows
= level 5.
6. Press the function button A again and again until the display shows the necessary
adjustment.
7. Press the on/off button to keep the operation.
If the water softener is set electronically to the level 1, the salt indicator light stays off.
Use of dishwasher salt
Do these steps to fill the salt container:
10
Use of dishwasher salt