manualshive.com logo in svg

AEG FAVORIT 50863, Instruction Book, Page: 9 / 48

Share
Download
AEG FAVORIT 50863 Instruction Book Download Page 9

Operating instructions

9

The digital display indicates:

- the level of hardness to which the water softener is set, 
- if the rinse aid dispenser is activated/deactivated, 
- the approximate remaining time of the running programme, 
- the end of the programme (a zero 

0

will appear in the digital 

display), 

- the countdown of the delay start, 
- fault codes concerning malfunction of the dishwasher.

Indicator lights:

have the following meanings:

The salt and rinse aid indicator lights are never illuminated while a
washing programme is running even if filling with salt and rinse aid is
necessary.

Programme in progress: illuminates

when a washing 

programme has been set and remains illuminated for all the 
duration of the washing programme.

Turns off

when the washing programme has ended.

When delay start has been set, this indicator light turns off 
and will come on again once the countdown has elapsed 
and the washing programme has started.

End of programme:

illuminates when the washing 

programme has ended.

"3 in 1 function":

indicates the activation/deactivation of 

the "3 in 1 function" (see "3 in 1 function").

Salt

refilling indicator light, illuminates when the salt has 

run out

Rinse aid

refilling indicator light, illuminates when the rinse

aid has run out

117998 91/0  21-04-2006  14:46  Pagina 9

Summary of Contents for FAVORIT 50863

















































Reviews:

No comments