Operating instructions
15
b) Setting electronically
(The dishwasher must be switched off)
NOTE:
the electronic setting of the water softener is possible
ONLY
with the
3 in 1 function
deactivated.
The dishwasher is factory set at level 5.
1.
Press the On/Off button. The indicator lights of the programme
selection buttons will illuminate (setting mode).
If only one programme selection button indicator light is
illuminated, this means that a washing programme is set.
The programme must be cancelled: press simultaneously function
buttons
2
and
3
for about 2 seconds, the indicator light of the set
programme button starts flashing. After about 2 seconds
the indicator lights of all the programme selection buttons will
illuminate; this means that the set washing programme has been
cancelled and the machine is now in setting mode.
2.
Press simultaneously function buttons
2
and
3
, until the indicator
lights of function buttons
1
,
2
,
3
and
4
start flashing.
3.
Press function button
1
, the indicator lights of function buttons
2
,
3
and
4
turn off while the indicator light of function button
1
goes on flashing, the digital display indicates the current level.
Example:
displayed = level 5.
4.
To change the level, press function button
1
. Each time the button
is pressed the level changes. (For the selection of the new level see
the chart).
Examples:
if the current level is 5, by pressing function button
1
once,
level 6 is selected.
if the current level is 10, by pressing function button
1
once,
level 1 is selected.
5.
To memorise the operation, switch off the dishwasher by pressing
the On/Off button or wait about 60 seconds after which the
dishwasher will automatically return to setting mode.
117998 91/0 21-04-2006 14:46 Pagina 15