background image

Put knives and cutlery with sharp points in the cutlery

basket with the points down or in a horizontal

position.

Do not keep the appliance door open without

supervision to prevent to fall on it.

Before any maintenance operation, deactivate the

appliance and disconnect the mains plug from the

socket.

Do not use high pressure water sprays and/or steam

to clean the appliance.

The ventilation openings in the base (if applicable)

must not be obstructed by a carpet.

The appliance is to be connected to the water mains

using the new supplied hose-sets. Old hose sets must

not be reused.

2. 

SAFETY INSTRUCTIONS

2.1 

Installation

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Do not install or use the appliance

where the temperature is less than 0

°C.

• Follow the installation instruction

supplied with the appliance.

• Make sure that the appliance is

installed below and adjacent to safe

structures.

2.2 

Electrical connection

WARNING!

Risk of fire and electrical

shock.

• The appliance must be earthed.

• Make sure that the electrical

information on the rating plate agrees

with the power supply. If not, contact

an electrician.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug and to the mains

cable. Should the mains cable need

to be replaced, this must be carried

out by our Authorised Service Centre.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• This appliance complies with the

E.E.C. Directives.

• Only for UK and Ireland. The

appliance has a 13 amp mains plug. If

it is necessary to change the fuse in

the mains plug, use fuse: 13 amp

ASTA (BS 1362).

2.3 

Water connection

• Do not cause damage to the water

hoses.

• Before connection to new pipes,

pipes not used for a long time, where

repair work has been carried out or

new devices fitted (water meters,

etc.), let the water flow until it is clean

and clear.

www.aeg.com

4

Summary of Contents for FAV55VI1P





















































Reviews: