Fill the rinse aid dispenser
when the indicator (
A
)
becomes clear.
If you use multi-tablets and
the drying performance is
satisfactory, the rinse aid
refill indication can be
disabled.
We recommend to always
use rinse aid for better
drying performance, also in
combination with multi-
tablets containing rinsing
agent.
9.
DAILY USE
1.
Open the water tap.
2.
Press the on/off button to activate
the appliance.
Make sure that the appliance is in
programme selection mode.
• If the salt indicator is on, fill the
salt container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3.
Load the baskets.
4.
Add the detergent.
5.
Set and start the correct programme
for the type of load and the degree
of soil.
9.1
Using the detergent
A
B
C
CAUTION!
Only use detergent
specifically designed for
dishwashers.
1.
Press the release button (
A
) to open
the lid (
C
).
2.
Put the detergent, in powder or
tablets, in the compartment (
B
).
3.
If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4.
Close the lid. Make sure that the lid
locks into position.
9.2
Setting and starting a
programme
The Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has
not started.
Starting a programme
1.
Keep the appliance door ajar.
2.
Press the on/off button to activate
the appliance. Make sure that the
appliance is in programme selection
mode.
3.
Press repeatedly
until the display
shows the number of the programme
you want to start. The display will
show the programme number for
approximately 3 seconds and then
show the programme duration.
4.
Set the applicable options.
5.
Close the appliance door to start the
programme.
ENGLISH
15
