English
25
Instruction Manual
Thank you for choosing our product. We hope you enjoy
using the appliance.
Symbols in these Instructions for Use
Important information for your safety is specially marked. It is
essential to comply with these instructions in order to avoid
accidents and prevent damage to the machine:
WARNING:
This warns you of dangers to your health and indicates pos-
sible injury risks.
CAUTION:
This refers to possible hazards to the machine or other
objects.
NOTE:
This highlights tips and information.
General Notes
Read the operating instructions carefully before putting the
appliance into operation and keep the instructions including
the warranty, the receipt and, if possible, the box with the in-
ternal packing. If you give this device to other people, please
also pass on the operating instructions.
• The appliance is designed exclusively for private use and
for the envisaged purpose. This appliance is not fit for
commercial use.
• The device is not suitable for installation in damp environ
-
ments.
• Turn off the device when not in use. Furthermore, turn
off the fuse in your fuse box when attaching accessories,
when cleaning or in case of interference.
• Do
not
operate the machine without supervision. When
leaving your home/apartment, always turn off the device.
• Regularly check the device for any signs of damage. If
damage is found the device must not be used.
• Use only original spare parts.
• In order to ensure your children’s safety, please keep all
packaging (plastic bags, boxes, polystyrene etc.) out of
their reach.
WARNING:
Do not allow small children to play with the foil. There is
a
danger of suffocation!
Special safety instructions
Install the fan with its blades being at least 2.3 meters
above the floor.
• Installation must be carried out by a qualified electrician and
comply with the requirements according to DIN VDE 0100-100
and IEC 60364-1.
• Do not install the fan directly above ovens or other heat sources.
• Do not install the fan on a contact socket but on the ceiling.
• A disconnect device with an all-pole contact opening width of at
least 3 mm must be installed into the fixed electrical connection.
• Do not reach into the fan blades while these are rotating.
• Watch out for long hair! It can be caught in the fan owing to the
air turbulence!