65
What to do if ...
If you are unable to remedy the fault with the above assistance,
please contact your specialist dealer or AEG Service Force Centre.
1
Warning:
Repairs to the applicance may only be carried out by ap-
proved service engineers! Repairs carried out by inexperienced persons
may cause serious injury to the user.
If the appliance has been used improperly, the customer service engi-
neer’s visit or that of the specialist dealer will not be free of charge,
even during the warranty period.
3
Due to the cold front of your appliance, the inner door glass may steam
over briefly if you open the door during or shortly after roasting or
baking.
Symptom
Possible cause
Remedy
The oven does not heat
up.
The oven has not been
switched on.
Switch on the oven.
The time has not been set.
Set the time.
The necessary settings have
not been made.
Check the settings.
The circuit breaker (at the
household fuse box) has
tripped or the fuse has
blown.
Check the circuit breaker or
fuse.
If the circuit breaker trips or
the fuse blows several times,
please contact an approved
electrician.
The oven safety cut-out has
been triggered.
See
Safety Cut-out.
The oven lighting does
not come on.
The oven light bulb is faulty.
Change the oven light bulb
(see Cleaning and Care).
Pyroluxe is not working
(“tEL” appears in the
time display)
The oven shelf runner has
not been removed
Remove the oven shelf run-
ner
The oven door is locked Appliance is not connected
to the mains; door lock has
been activated.
Connect the appliance and
wait at least 10 seconds until
the red indicator goes out.
Summary of Contents for COMPETENCE B6142-1
