Operating Instructions
16
Before using for the first time
Setting/Changing the Time
Following the connection of mains power the TIME function indicator
and the temperature/time display flash.
You must then first set the time. The time can be set with the appliance
either switched on or off.
3
If the time has not been set, the oven cannot be switched on.
Setting the Time
0
1.
Press the
+
or
-
button and set the time as required.
Each time the
+
or
-
button is pressed the time moves forward or
back one minute respectively.
2.
Press the clock
W
button or wait approx. 5 seconds.
The time displayed in the temperature/time display ceases to flash and
is displayed continuously. The time is now set.
3
By pressing the
+
or
-
button for more than 2 seconds, the minutes
will start to run forwards or backwards until the button is released
again. By this means you can reach the required setting quicker.
3
If the appliance has been isolated from the mains, e.g. due to a fuse
being removed, the temperature/time display will flash again.
In this case reset the time again, as described above.
Summary of Contents for COMPETENCE B 8110
