AEG CG 6600, Operating Instructions Manual

Page: 50 / 224

g
50
3
It is not recommended to pour off hot
water for longer than 2 minutes with-
out a break.
0
You can stop hot water from dispens-
ing at any time. To do so, press the "hot
water" button again (Figure 32).
12 Setting the grind level
The mill mechanism is set at the fac-
tory to a medium grind level. If coffee
is dispensed too quickly or too slowly
(in drips), you can change the grind
level during the milling process.
1
The grind level can only be changed
during the milling process. Changing
the settings when the mill mecha-
nism is at rest can damage the coffee
machine.
0
Adjust the grind level with the knob
for setting the grind level (Figure 2, T)
(Figure 12).
• If the coffee only comes out in drips
or not at all, the knob must be
turned by one position clockwise.
Turn one position at a time until
coffee is dispensed satisfactorily.
• If the coffee comes out too fast and
the crema does not meet your taste,
turn the knob by one position anti-
clockwise.
3
Make sure that you do not turn the
knob for setting the grind level too far,
as otherwise coffee may come out in
drips when dispensing 2 cups.
3
You will only notice the effect of these
corrections after at least 2 more cof-
fees have been made, however.
Removing foreign bodies in the mill
mechanism.
Foreign bodies in the mill mechanism,
such as small stones, can damage the
mechanism. A foreign body in the cof-
fee causes an even rattling noise. If you
hear this noise during the milling pro-
cess, switch the appliance off immedi-
ately and consult customer services.
13 Menu settings
13.1 Setting the language
You can choose between several langu-
ages. A different language can be
selected as follows:
0
Press the "MENU" button (Figure 5).
The menu option «
CHOOSE LAN-
GUAGE
» appears.
0
Confirm the menu option with the
"OK" button (Figure 6). The language
set appears on the display.
0
Press the scrolling buttons "<" or ">"
(Figure 6) until desired language
appears.
0
When the desired language is dis-
played, confirm it with the"OK" button
(Figure 6). This language is program-
med in accordingly.
If "OK" is not pressed, the appliance
automatically returns to the coffee
mode after about 120 seconds without
saving the entries.
3 The display automatically jumps back
to the menu option «
CHOOSE LAN-
GUAGE
» after programming.
0
To go back to the coffee mode, press
the "MENU" button (Figure 5)or wait
about 120 seconds until the appliance
automatically jumps back to coffee
mode.
13.2 Setting the coffee temperature
You can choose between three tempe-
rature levels. The coffee temperature
levels are defined as follows:
«
TEMPERATURE LOW
»
«
TEMPERATURE MEDIUM
»
«
TEMPERATURE HIGH
»
The factory setting is
«
TEMPERATURE HIGH
». You can
change this as follows:
0
Press the "MENU" button (Figure 5).
The menu option «
CHOOSE LAN-
GUAGE
» appears.
0
Press the scrolling buttons "<" or ">"
(Figure 6) until the menu option
«
TEMPERATURE
» appears.