UK
8.4
Adjust Earpiece Volume
There are
5
levels of earpiece volume on your Handset.
•
During a call, press
to select from
“VOLUME 1”
to
“VOLUME 5”
.
>The current setting is shown.
>When you end the call, the setting will remain at the last selected level.
8.5
Adjust Speaker Volume
There are
5
levels of speaker volume.
•
During a handsfree call, press
to select from
“VOLUME 1”
to
“VOLUME 5”
.
>The current setting is shown.
>When you end the call, the setting will remain at the last selected level.
8.6
Mute/Unmute the Microphone
•
When the microphone is muted, the handset displays
“MUTE ON”
and your caller cannot hear you.
•
During a call, press
to turn on/off the microphone.
8.7
Paging
The paging feature enables you to locate a missing handset if the handset is in range and contains
charged batteries.
•
Press the key under the base unit.
>All the registered handsets that are in range will start to ring.
You can stop the paging by pressing any key on a handset or the key under the base unit again.
8.8
Switching the Handset On/Off
Press and hold on your Handset for more than 2 seconds to switch the handset on or off in standby
mode.
>When first turned on, the display shows
“SEARCHING…”
until the handset finds the base.
Note:
You can switch the handset off to save battery life, if the handset is not on the base.
IMPORTANT:
When the handset is
“OFF”
, it cannot be used for making calls including emergency calls. It will not ring
when there is an incoming call.
To answer a call, you will need to switch it back on and it may take some time for the handset to re-
establish a radio link with the base unit.
8.9
To Lock/Unlock the Keypad
You can lock the keypad to avoid making calls or pressing the keys accidentally.
•
In standby mode, press and hold
for 2 seconds to lock the keypad.
>The handset displays
“KEYS LOCKED”
.
•
To turn the keypad lock off, press and hold
again.
Note:
Incoming calls can still be answered even if the keypad is locked.
