15. NOT SUB is displayed if the removed handset is not submitted to another
base, or SEARCHING if it is submitted to another base set.
3.10 Selecting a Base Set
If the handset is subscribed to several base sets, it can only operate on one at
a time. Therefore it has to select a base set.
a) Automatic Base Selection
The handset will operate on the first base set found.
1.
The handset is in standby (no tone).
2.
Press the program key
(
4
).
3.
Press the arrow down
(
11
) or arrow up
(
3
) key until SETTING is dis-
played.
4.
Press the program key
(
4
).
5.
DATE/TIME is displayed.
6.
Press the arrow down (
11
) or arrow up
(
3
) key until BASE SEL is displayed.
7.
Press the program key
(
4
).
8.
Press the arrow down (
11
) or arrow up
(
3
) key until AUTO is displayed.
9.
Press the program key
(
4
).
10. SEARCHING is displayed and the antenna symbol
is flashing.
11. The handset emits a tone and returns to standby. It has found a base set.
b) Manual Base Selection
1.
Same procedure as under a) above up to item 8.
8.
Press the arrow down (
11
) or arrow up
(
3
) key until MANUAL is displayed.
9.
Press the program key
(
4
).
10. The display shows BASE_.
11. Enter the number of the base set you want to use by pressing the numeri-
cal keys.
12. Press the program key
(
4
).
13. SEARCHING is displayed and the antenna symbol
is flashing.
14. The handset emits a tone and returns to standby. It uses the selected base
set.
NOTE:
To select a base set, the handset already has to be subscribed to it.
13
Summary of Contents for Birdy
Page 6: ...2 Description 6 Handset Birdy Voice Base Set ...
Page 52: ...52 ...
