AEG BEWS18125BLC, Original Instructions Manual

Page: 28 / 36

28
28
BATTERY AND CHARGER
Compatible battery pack
(not included)
Compatible charger
(not included)
L1815R
L1820R
L1825R
L1830R
L1840R
L1850R
L1860R
L1860B
L1860R-X5
L1890R
AL18G
AL1218G
BL1218
BLK1218
BL18DP-X5
BL18DP2-X5
Use AEG 18V battery and charger only
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions
for future reference.
ANGLE GRINDER SAFETY WARNINGS
Safety Warnings Common for Grinding, Wire Brushing or
Abrasive Cutting-Off Operations:
a. This power tool is intended to function as a grinder, wire
brush or cut-off tool. Read all safety warnings, instructions,
illustrations and specifications provided with this power
tool.
Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
b. Operations such as sanding or polishing are not
recommended to be performed with this power tool.
Operations for which the power tool was not designed may
TECHNICAL DATA CORDLESS ANGLE GRINDER BEWS18125BLC
BEWS18125BLP
Rated voltage 18V
Rated speed 11000 min
-1
Thickness of grinding wheel 6 mm
Grinding wheel diameter 125 mm
Thread of work spindle M14
Weight - not including battery pack 2.1 kg
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
A-weighted sound pressure level
L
p
= 83 dB(A)
Uncertainty K 3 dB(A)
A-weighted sound power level L
W
= 94 dB(A)
Uncertainty K 3 dB(A)
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 60745:
Vibration emission value
Surface grinding: Vibration emission value
a
h,AG
= 9.4 m/s 2
Uncertainty K 1.5 m/s 2
For other applications, e.g. Abrasive Cutting-Off Operations or Wire Brushing other vibration values could occur.
TYPE OF DISCS/WHEELS
Designation Type
Straight cutting-off wheels not reinforced 41
Straight and depressed-centre cutting-off wheels, reinforced 41
Depressed-centre grinding wheels reinforced 27
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level
represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but
not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.