5.
Put the door with the outer side
down on a soft cloth on a stable sur-
face. This is to prevent scratches.
2
B
1
6.
Hold the door trim (B) on the top
edge of the door at the two sides
and push inwards to release the clip
seal.
7.
Pull the door trim to the front to re-
move it.
8.
Hold the door glass panels on their
top edge one by one and pull them
up out of the guide.
9.
Clean the glass panel with water
and soap. Dry the glass panel care-
fully.
Installing the door and the
glass panels
When the cleaning is completed, install
the glass panels and the oven door. Do
the above steps in the opposite se-
quence. Install the smaller panel first,
then the larger.
11.
WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem
Possible cause
Remedy
The appliance does not
heat up.
The appliance is deacti-
vated.
Activate the appliance.
The appliance does not
heat up.
The clock is not set.
Set the clock.
The appliance does not
heat up.
The necessary settings
are not set.
Control the settings.
The appliance does not
heat up.
The fuse is released.
Make sure that the fuse
is the cause of the mal-
function. If the fuse re-
leases again and again,
contact a qualified elec-
trician.
The lamp does not oper-
ate.
The lamp is defective.
Replace the lamp.
ENGLISH
21
Summary of Contents for BE2003021
Page 1: ...BE2003021 EN User manual ...
Page 29: ...ENGLISH 29 ...
Page 30: ...30 www aeg com ...
Page 31: ...ENGLISH 31 ...
