Display shows:
Description
Possible cause
Remedy
The display shows "F102".
• You did not fully close the
door.
• The door lock is defec‐
tive.
• Fully close the door.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows
"F102" again, contact the
Customer Care Depart‐
ment.
The display shows an error
code that is not in this table.
There is an electrical fault.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care De‐
partment.
Problems with cleaning procedure
Description
Possible cause
Remedy
Steam and condensation
settle on the food and in the
cavity of the oven.
You left the dish in the oven
for too long.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
You want to activate the
cleaning function, but the
display shows "C4".
The Plus Steam is pressed.
Press the Plus Steam again.
The water in the cavity em‐
bossment does not boil.
The temperature is too low.
Set the temperature at least
to 110 °C.
Refer to "Hints and tips"
chapter.
The water comes out of the
cavity embossment.
There is too much water in
the cavity embossment.
Deactivate the oven and
make sure that the appliance
is cold. Wipe the water with
a cloth or sponge. Add the
correct amount of water to
the cavity embossment. Re‐
fer to the specific procedure.
www.aeg.com
42
Summary of Contents for BD541P
Page 1: ...USER MANUAL EN User Manual Oven BD541P BPK556220M BPK55622YM ...
Page 46: ......
Page 47: ......