8
ENGLISH
BS2E 7.2 T, BS2E 9.6 T, BS2E 12 T, BS2E 14.4 T, POWERBASE 60
New battery packs reach full loading capacity after 4 – 5 chargings and
dischargings. Battery packs which have not been used for some time should be
recharged before use.
Note the correct position when inserting
the battery pack. Make sure it is fully
inserted.
The battery clamps of the charger are fed
by mains supply. do not touch the tool with
conducting objects.
Charging of
batteries
Battery pack
reception
Battery too hot (over 45
o
C)
Battery is charged/
Maintenance charging
flashing
Maintenance charging until
battery temperature is
above 0
o
C
Maintenance charging
allow battery to cool down
below 45
o
C, and re-insert
Connect charger
Charger ready
Insert battery
flashing
Battery too cold (less than 0
o
C)
flashing
Battery temperature 0
o
C–45
o
C
quick charging
continuous
light
Laden
voll
Zu heiß
Zu kalt