4
ENGLISH
BS2E 7.2 T, BS2E 9.6 T, BS2E 12 T, BS2E 14.4 T, POWERBASE 60
The chuck is easier to remove when 1st gear is engaged as the gears tend not to
rotate as easily.
1.
To remove the chuck first take off the
safety screw by turning to the right.
2.
Lock Allen key* in chuck.
3.
Loosen the keyless chuck by hitting the
inserted Allen key lightly with a plastic
hammer.
Mount the chuck in reverse order.
Aways re–fasten the locking screw after
mounting the chuck. Otherwise thchuck
might become loose in anti–clockwise
operation.
*Keys are not included as standard equipment.
Brief description
BS2E 7.2 T
BS2E 9,6 T
BS2E 12 T
BS2E 14.4 T
12 VO
LT
4
3
2
1
4
5
1.4Ah
13.4 Wh
9,6 VOL
T
4
3
2
1
4
5
4 W
1.4Ah
10.
7.2 VO
4
3
2
1
4
5
1.7Ah
24.5 W
h
14.4 V
OLT
4
3
2
1
4
5
Modifications: Text, diagrams and data are correct at the
time of printing. In the interest of continuous improvement of
our products, technical specifications are subject to alteration
without prior notice.
Variable torque pre-selection at adjustment ring for
correct screwing depth when working with different
screws or different material.
Reversing lever for changing from forward to reverse
rotation – due to a lockout mechanism, switching the lever
is only possible if the On-/Off switch is not depressed.
Switch trigger for switching the machine on and off, and
for smooth starting and varying speed.
QUICKSTOP – the speed of the working spindle is
immediately reduced when releasing the switch.
Powerful battery pack with reverse battery protection,
negative and positive pole cannot be mistaken.
Two-speed gears, changeable
under no-load at the gear lever.
Bit storage for compartment
screwdriver bits
Keyless chuck for tightening without a key.
Changing the
keyless drill
chuck
4
3
2
1
4
5
4
3
2
1
4
5