g
9
• The mains cable is of a special type
and is only to be replaced by an AEG
customer service centre since special
tools are required for its replace-
ment.
• Repairs to electrical equipment may
only be performed by qualified ser-
vice engineers. Improper repairs may
lead to serious hazards for the user.
• In the case of a malfunction, please
therefore contact your dealer or AEG
customer service direct.
• If the appliance is used for purposes
other than those intended or used
incorrectly, no liability can be accepted
for any damage that may be caused.
Child Safety
• Do not leave the toaster switched on
unsupervised.
• Keep children away from electrical
appliances.
You should take note of the fol-
lowing when using your toaster
• Do not place the appliance on hot sur-
faces.
• Do not use near naked flames.
• Do not use the toaster underneath or
near inflammable objects (e.g. cur-
tains).
• Toast can catch fire if toasted repeat-
edly, therefore only use the keep warm
setting after toasting.
• Do not cover the toasting slot when
toasting.
• Do not immerse the appliance in
water!
• Do not kink the mains lead or bring it
into contact with hot parts of the
appliance.
• To move the appliance when warm
after use, only pick it up by the ther-
mally insulated outer housing.
2
Disposal
Disposing of the Packaging Material!
Do not simply throw away the packag-
ing material. Please observe the fol-
lowing instructions:
Packaging made from cardboard can
be put in the waste paper collection.
Deposit polyethylene plastic bags (PE)
at a PE collection point for recycling.
Padding materials made from foam
polystyrene (PS) are CFC-free and can
be deposited at the appropriate collec-
tion point (recycling depot). Please
inquire with your local authority about
your local recycling centre.
Disposing of your old appliance!
When you eventually stop using your
appliance please take it to the nearest
recycling centre or to your dealer who
will take it back for a small fee.
Operating Instructions
3
Prior to Using for the First Time
To avoid the build up of unpleasant
odours, the appliance should be placed
near an open window and operated a
few times at the maximum browning
setting
without any bread
. Leave the
toaster to cool to room temperature
between the heating phases.
Switching On
0
Plug the mains plug into the mains
socket.
0
Insert bread for toasting.
Select the browning setting and press
down the start lever (Figure 3).
3
When the required degree of browning
has been reached, the toaster switches
off automatically; the slices of toast
are lifted up ready for removal. By lift-
ing the start lever
(bread lift func-
tion)
the toasted bread can be lifted
sufficiently such that it is easy to
remove (Figure 4).
Summary of Contents for AT 206
Page 2: ...2 A B C D E K J G H F L 1 3 2 ...
Page 3: ...3 9 8 7 6 5a 5b 4 ...
