38
PD201806 AEG GRID-TIED SINGLE-PHASE SOLAR INVERTER V.1-18 EN
38
5.4.8 Mode settings
The default mode of series grid-tied solar inverter is “independent”. But if the current of solar modules are joined into
the inverter as figure 26 shows, it is necessary to switch the mode into “parallel”.
Figure 26: ‘Parallel’ input mode
Only when the DC voltage is high enough, the LCD display is working, and the AC switch
is off, it is possible to modify the inverter DC input mode via the LCD screen and keypad.
5.5 Functions operation
In AS-IR01 or AS-IR01-2 with optional LCD display, after powering up the inverter by DC input for the first time or after
restoring factory settings, the LCD screen will show the following message:
S O L A R I N V E R T E R
I n i t i a l i n g
… …
W a i t i n g
> > > > > > >
Figure 27: Initialization
and a list of countries will be displayed (as in Figure 28).
Solar modules
DC convergence (lighting) box
SPD
FU
Inverter
QF
Track A
Track B
Line splitter