17
PD201806 AEG GRID-TIED SINGLE-PHASE SOLAR INVERTER V.1-18 EN
17
5.
The installation position should be such that interference from other electrical devices is avoided.
6.
The inverter needs to be installed on a firm and sturdy surface, such as a wall, or metal brackets.
7.
The installation surface should be perpendicular to the horizontal line. Please refer to Figure 9
Figure 8: Installation space
Ensure there is sufficient space (clearance) for heat releasing. Generally, the below listed clearance requirements
should be met:
Position
Minimum clearance
Lateral
200mm
Top
450mm
Bottom
450mm
Table 8: Minimum clearance
Figure 9: Installation position
Do not remove any inverter part or component, otherwise damage to the device and physical injury
may occur.