18
AEG LOW VOLTAGE ENERGY STORAGE UNIT (8 KWH / 12 KWH) INSTALLATION MANUAL
PD202107 V1-21
EN
Step 6:
External wiring (PV/Grid/Load)
Item.
Description
1
Emergency stop
2
Load connector
(Remark: Back-up load connector)
3
Grid connector
4
GEN connector
5
PV connector
6
GEN control port
7
CT connector
PV connection
Only solar PV systems that comply with the local
safety laws and regulations and with the technical
parameters specified in this manual are suitable for
being connected to the AEG energy storage system.
To connect the photovoltaic system to the AEG energy
storage system, a DC connector specifically designed
for connection with storage systems must be used.
Using other connectors / connection devices without
explicit authorization from Solar Solutions may result
in damage to the AEG energy storage system, unstable
operation or fire, for which Solar Solutions will not take
any direct or joint liability
.
Notes
:
•
Recommended wire for PV connection: Ø 4mm².
•
PV terminal crimping: recommended torque
For connection of a multiple battery packs to the
inverter:
3
1
4
2
Item.
Description
1,2
Battery pack
3
Breaker
4
Inverter
Step 5
: Fix the battery module and close the cabinet.
,
Item.
Description
1
M6*12 combination screw
2
Fixing bracket
