9
AEG HIGH VOLTAGE BATTERY (10 KWH / 15 KWH) INSTALLATION MANUAL
PD202209 V2-1-22
EN
Item
Description
Tape measure
Phillips-screwdriver
Crimping tool
Wire cutters
Wire strippers
Safety (insulated) gloves
Safety goggles
Dust mask
Safety shoes
Use properly insulated tools to prevent accidental
electric shock or short circuits.
The below installation material should be arranged by
the installer for the installation of the battery pack:
• Charging cables
• Network cable
• DC breaker
4.2 Wire specifications
In order to standardize the wiring specifications of
the AEG high voltage battery AS-BBH1-xxx/HV (xxx=
10000 and 15000) please make sure to follow the
below requirements for the connecting wires:
Battery cable
Communication cable
Recommended:
8 AWG / 10mm²
conductor with double
insulation
Recommended: standard
communication cable
with shielding function
4.3 Unboxing
Due to its weight, the AEG high voltage battery
needs to be handled by two or more people.
Before installing the product, please carry out a first
check of the package and the package content as
described in 2.2 „Handling safety“.
Below is a sketch of the packing box of the AEG high
voltage battery.
Step 1
: Open the packing box, take out the wall bracket
and remove the EPE plate .
Item.
Description
1
EPE plate
2
Wall bracket
3
AEG high voltage battery
