background image

4

AEG HIGH VOLTAGE BATTERY  (10 KWH / 15 KWH) INSTALLATION MANUAL

PD202209 V2-1-22

EN

2. SAFETY

2.1 General safety 

All AEG high voltage batteries are tested according to 
international safety regulations. 
AEG high voltage batteries should be installed, 
maintained, connected and operated by qualified 
technicians in compliance with all local and national 
applicable standards, codes and regulations issued 
by the relevant power suppliers, companies and 
authorities. Installers bear the risk of all injury that 
might occur during installation including, without 
limitation, the risk of electric shock. Check and follow 
all safety precautions specified even for the other 
components of the system. Keep children away 
from the installation site and during transportation,  
installation and maintenance of the electrical 
equipment.

2.2 Handling safety 

Please observe the following indications when handling 
the AEG high voltage battery.
Look for any visible damage to the package or the 
product itself. Double-check the order information and 
the product nameplate to ensure the products are of 
the ordered type. Check that the package contents are 
not damaged and that all items listed are present (see 
4.5 „Unboxing and package content“). Should you find 
any issues, contact the shipping company and / or your 
supplier as soon as possible before attempting product 
installation. 

Take note of the indications displayed on the product 
packaging. Specifically:
 

Icon

Meaning

This side up 

Fragile 

Handle with care

Do not turn or drop

Do not stack

Icon

Meaning

Keep dry

Packaging icon meaning

Please make sure that the high voltage battery and 
its components are properly packed and sealed to 

ensure safe transportation. Ensure that the battery 
pack is stored in a dry, clean place and not exposed to 
water or dust. 

Kg

The battery pack is heavy. Handle it carefully in 
order to avoid injuries. At least two people are 

required to move and install the battery pack. 

To ensure handling, installation and maintenance 
safety, and to avoid personal injuries, please adopt 
mechanical protective measures such as wearing 
protective shoes and work clothes. 

To avoid electric shock, remove metallic 

rings, watchbands, ear, nose or lip rings or other 
metallic devices during installation, connection and 
maintenance of the high voltage battery.

2.2.1  Handling the battery pack

+

 

_

 

 Handle the battery pack carefully as it may leak 

corrosive electrolyte. 

 To avoid the risk of explosion of the battery pack, 

make sure to observe the following:
Do not make the battery pack undergo strong impacts. 
Do not crush or puncture the battery pack. 
Do not dispose of the battery pack in a fire.

 To avoid fire risks to the battery pack, please make 

sure to observe the following:
Do not expose the battery pack to temperatures that 
exceed 60°C.
Do not place the battery pack near a heat source, such 
as a fireplace.
Do not expose the battery pack to direct sunlight.
Do not allow the battery connectors to touch 
conductive objects such as wires.

To avoid the risk of the electric shock from the 

battery pack, please make sure to observe the following 
handling instructions:
Do not disassemble the battery pack.

Summary of Contents for AS-BBH1-10000/HV Series















Reviews: