--------------------------------------------------------------------------------27/45--------------------------------------------------------------------------------
3.5
Mifare instructions
3.5.1
AC – anticollision
With the command AC the reader executes the anticollision level 1 command.
Input format:
AC
<CR>
Output (example):
595B1B80
<CR>
3.5.2
AC2 – anticollision level 2
With the command AC2 the reader executes the anticollision level 2 command.
Input format:
AC2
<CR>
Output (example):
595B1B80
<CR>
3.5.3
KM – key mode
With the command KM you switch the key that is used by the commands RD and WD. It is possible to
use the default key or one of the keys saved with the command WK.
Input format:
KM
<SP>
parameter
<CR>
Output (example):
parameter
<CR>
PARAMETER
FUNCTION
0
use default key
(FFFFFFFFFFFF)
1..8
use saved key 1 to 8
3.5.4
KT – key type
With this command you switch if the key that is used with the commands RD and WD is type A or B.
Input format:
KT
<SP>
parameter
<CR>
Output (example):
parameter
<CR>
Summary of Contents for ARE DT1
Page 1: ...ARE DT1 Installation Guide ...
Page 4: ... 4 45 10 REVISIONS 45 ...
