AEG ARE DT1, Installation Manual

Page: 19 / 45

--------------------------------------------------------------------------------19/45--------------------------------------------------------------------------------
3.3.7 RA – resend last answer
The command RA resends the last answer sent by the reader.
Input format:
RA
<CR>
Output (example):
0
<CR>
3.3.8 TSC – time show code
With the command TSC you can define the time in ms, after that the transpondercode is shown again,
when the CID parameter is set to 1. If TSC is 00, the code is not shown a second time.
Input format:
TSC
<SP>
parameter
<CR>
Output (example):
00
<CR>
PARAMETER FUNCTION
00 TSC is not active
01..FF TSC time in ms
3.3.9 TOR – maximum reading time
TOR is the timeout time for the reader. TOR is used in operation mode 2 as maximum gating time for
a reading process. The length of the maximum gating time results from the equation gating_time =
TOR * TB.
The time constant TB (time base) has always the default value 100ms.
Input format:
TOR
<SP>
parameter
<CR>
Output (example):
05
<CR>
Parameter:
PARAMETER FUNCTION