background image

8

8

of medication, alcohol or drugs, if you are currently under 

medical care, or if you are tired.

 

Check the product regularly for any possible damage. Do 

not use damaged appliances.

 

Do  not  try  to  repair  the  product  yourself.  Always  use  an 

authorised technician for repairs.

 

Only  use  original  spare  parts  and  accessories.  Non 

approved parts or third-party accessories may be a possible 

source of danger and cause the guarantee to become void.

 

If you notice liquid leaking from the product, switch it off 

immediately and remove all battery packs.

 

Do  not  submerge  the  product  in  water.  Make  sure  that 

water is not spilled on the product.

 

When  disposing  of  the  wastewater,  make  sure  that  you 

observe any legal regulations.

 

Only store the product in a safe and dry location outside the 

reach of children.

 

This appliance is not intended for use by persons (including 

children)  with  reduced  physical,  sensory  or  mental 

capabilities, or lack of experience and knowledge, unless 

they have been given supervision or instruction concerning 

use  of  the  appliance  by  a  person  responsible  for  their 

safety.

 

Children should be supervised to ensure that they do not 

play with the appliance.

 

Never vacuum up hot ashes, pointed or sharp objects.

 

Never use the product in damp rooms.

 

Do not use the product without a dust bag (an exception is 

wet vacuuming or with the cartridge filter). Make sure that 

the dust bag is inserted into the appliance correctly.

 

When using the product, make sure that no hair, clothing, 

or members are drawn in.

 

Keep the vacuum cleaner away from heat sources such as 

radiant heaters, ovens, and so on.

 

If the hose or tools are blocked, switch off the product and 

remove the blockage(s) before re-starting the product.

 

Cleaning  filters  and  replacing  them  regularly  maintains 

vacuum  performance.  We  recommend  that  your  filters 

should be checked, cleaned and replaced periodically.

 

Damage to the vacuum cleaner caused as a direct result 

of not adhering to the general safety information and the 

instructions in this user guide invalidates the warranty.

 

Cleaning  and  user  maintenance  shall  not  be  made  by 

children without supervision.

 

Rechargeable  batteries  are  to  be  removed  from  the 

appliance before being charged.

 

Exhausted batteries are to be removed from the appliance 

and safely disposed of.

 

If the appliance is to be stored unused for a long period, the 

batteries should be removed.

 

The supply terminals are not to be short-circuited.

SPECIFIED CONDITIONS OF USE

This cordless wet/dry vacuum is intended for household use. It 

may be used for light vacuuming of wet or dry media.

  CAUTION

Danger  of  explosion  if  battery  is  incorrectly  replaced. 

Replace only with the same or equivalent type.

ASSEMBLY

  CAUTION

bags.  Before  attempting  to  use  or  before  cleaning  this 

vacuum, be sure that you fully understand the instructions 

UNPACKING THE PRODUCT AND GENERAL ASSEMBLY

See figure 1-8.

1.  Verify that no battery pack is inserted in the battery port(s).
2.  Undo the latches.
3.  Lift the power head off the tank (Fig 1).
4.  Remove  the  contents  from  inside  the  tank  and  carton. 

Make sure you have all contents as listed in component list 

(Fig 2).

5.  Turn the tank upside down and insert the four caster feet 

into  the  slots  on  the  base. Apply  downward  pressure  to 

each caster. Verify that the casters are mounted correctly. 

Lock the casters in place with the provided screws (Fig 3).

6.  The  product  comes  ready  for  dry  vacuum  cleaning.  If 

HEPA filter is not installed, refer to the Installing HEPA filter 

section for instructions of installation (Fig 5).

7.  Fit collection bag flange onto the inlet stub, taking care not 

to damage the bag (Fig 4).

8.  For  wet  vacuum  cleaning,  remove  the  HEPA  filter  and 

collection  bag.  Install  the  supplied  foam  filter.  Refer  to 

the Installing foam sleeve filter section for instructions of 

installation (Fig 11).

9.  Place the power head back on the tank, aligning the top 

section with the latches, and hook the latches (Fig 6).

10. Insert the locking end of the hose into the vacuum port and 

turn to lock into place (Fig 7).

11. Choose the desired accessories and push onto the suction 

tube (Fig 8).

 

 WARNING

replaced prior to performing wet vacuuming operations.

BATTERY PORTS

The product is equipped with dual battery ports for an extended 

operation time per use. When two battery packs are inserted, 

the product draws power from the battery pack at the left port 

the product will begin drawing power from the battery pack at 

the right port.

INSTALLING/REMOVING BATTERY PACK

See figure 9.

The product is operated by an AEG 18V battery pack.
1.  Open the battery port cover (Fig 9).
2.  Place the battery pack in the product, aligning the ribs on 

the battery pack with the grooves in the battery port (Fig 9).

Summary of Contents for AP218E2-0













Reviews: