AEG ALT58B, Original Instructions Manual

Page: 27 / 32

25
25
INTENDED USE
The cordless line trimmer is intended to be used only by adults who
have read and understood the instructions and warnings in this
manual and can be considered responsible for their actions. The
product is only intended for use outdoors in a well-ventilated area.
For safety reasons, the product must be adequately controlled by a
two-handed operation.
When fitted with the line trimmer head (and appropriate guard), the
product is intended for cutting long grass, pulpy weeds, and similar
vegetation at or about ground level.
The cutting plane should be approximately parallel to the ground
surface. The product should not be used to cut or trim hedges,
bushes, or other vegetation where the cutting plane is not parallel
to the ground surface.
Do not use the product for any other purpose.
TECHNICAL DATA CORDLESS LINE TRIMMER
Rated voltage 58 V
High speed
6700 r/min - Cut swath 380 mm
6400 r/min - Cut swath 430 mm
Low speed 5200 r/min - Cut swath 380 mm
4800 r/min - Cut swath 430 mm
Cutting line diameter 2.4 mm
Cutting swath
380/430 mm
Weight without battery pack (with harness)
4.8 kg
Noise emission level (in accordance with EN 50636-2-91 Annex CC)
A-weighted sound pressure level at the operator position
L
pA
90.3 dB (A)
Uncertainty K 2.5 dB
A-weighted sound power level L
wA
104.6 dB (A)
Uncertainty K 2.5 dB
Vibration Level (in accordance with EN 50636-2-91 Annex BB)
Front handle
a h 3.0 m/s
2
Rear handle a h 2.5 m/s 2
Uncertainty
K
1.5 m/s
2
BATTERY AND CHARGER
Model ALT58TLI401 ALT58BT
Battery pack ABP58LI-401 Not included
Charger ABC58S Not included
Compatible battery packs
ABP58LI-201
ABP58LI-401
Compatible charger ABC58S
Battery pack weight
- 4.0Ah 1.83 kg
- 2.0Ah 1.24 kg
REPLACEMENT PART
2.4 mm twist line 528721000
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test method and may be
used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the
total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.