background image

7

7

AIR COMPRESSOR USE AND CARE

 

Ŷ

Do not exceed the pressure rating of any component in the 
system.

 

Ŷ

Protect material lines and air lines from damage or puncture. 
Keep hose and power cord away from sharp objects, chemical 
spills, oil, solvents, and wet floors.

 

Ŷ

Check hoses for weak or worn condition before each use, making 
certain all connections are secure. Do not use if defect is found. 
Purchase a new hose or notify an authorised service centre for 
examination or repair.

 

Ŷ

Release all pressures within the system slowly. Dust and debris 
may be harmful.

 

Ŷ

Store idle air compressors out of the reach of children and other 
untrained persons. Air compressors are dangerous in the hands 
of untrained users.

 

Ŷ

Maintain air compressors with care. Follow maintenance 
instructions. Properly maintained products are easier to control.

 

Ŷ

Check for misalignment or binding of moving parts, breakage 
of parts, and any other condition that may affect the product’s 
operation. If damaged, have the air compressor serviced before 
using. Many accidents are caused by poorly maintained products.

 

Ŷ

Keep the exterior of the air compressor dry, clean, and free from 
oil and grease. Always use a clean cloth when cleaning. Never use 
brake fluids, gasoline, petroleum-based products, or any strong 
solvents to clean the unit. Following this rule will reduce the risk 
of deterioration of the enclosure plastic.

SERVICE

 

Ŷ

When servicing use only identical replacement parts. Use of any 
other parts may create a hazard or cause product damage.

Save these instructions. Refer to them frequently and use them 
to instruct other users. If you loan someone this tool, loan them 
these instructions also.

AIR COMPRESSOR SAFETY WARNINGS

 

Ŷ

Know your air compressor. Read operator’s manual carefully. 
Learn its applications and limitations, as well as the specific 
potential hazards related to this product. Following this rule will 
reduce the risk of electric shock, fire, or serious injury.

 

Ŷ

Drain tank of moisture after each day’s use. If unit will not be used 
for a while, it is best to leave drain valve open until such time as it 
is to be used. This will allow moisture to completely drain out and 
help prevent corrosion on the inside of tank.

 

Ŷ

Risk of fire or explosion. Do not spray flammable liquid in a 
confined area. Spray area must be well ventilated. Do not smoke 
while spraying or spray where spark or flame is present. Keep 
compressors as far from the spraying area as possible, at least 
10 m (33 feet) from the spraying area and all explosive vapours.

 

Ŷ

Risk of bursting. Do not adjust regulator to result in output 
pressure greater than marked maximum pressure of attachment. 
Do not use at pressure greater than 8 bar.

 

Ŷ

To reduce the risk of electric shock, do not expose to rain. Store 
indoors.

 

Ŷ

Inspect tank yearly for rust, pin holes, or other imperfections that 
could cause it to become unsafe.

 

Ŷ

Never weld or drill holes in the air tank.

 

Ŷ

Never use the air compressor with the guard removed.

 

Ŷ

Make sure the hose is free of obstructions or snags. Entangled 
or snarled hoses can cause loss of balance or footing and may 
become damaged.

 

Ŷ

Use the air compressor only for its intended use. Do not alter or 
modify the unit from the original design or function.

 

Ŷ

Always be aware that misuse and improper handling of this 
product can cause injury to yourself and others.

 

Ŷ

Never leave a tool unattended with the air hose attached.

 

Ŷ

Never point any air tool toward yourself or others.

 

Ŷ

Do not operate this air compressor if it does not contain a legible 
warning label.

 

Ŷ

Do not continue to use a tool or hose that leaks air or does not 
function properly.

 

Ŷ

Always disconnect the air supply and power supply before making 
adjustments, servicing a product, or when a product is not in use.

 

Ŷ

Do not attempt to pull or carry the air compressor by the hose.

 

Ŷ

Your tool may require more air consumption than this air 
compressor is capable of providing.

 

Ŷ

Always follow all safety rules recommended by the manufacturer 
of your air tool, in addition to all safety rules for the air compressor. 
Following this rule will reduce the risk of serious personal injury.

 

Ŷ

Never direct a jet of compressed air toward people or animals. 
Take care not to blow dust and dirt towards yourself or others. 
Following this rule will reduce the risk of serious injury.

 

Ŷ

Do not use this air compressor to spray chemicals. Your lungs 
can be damaged by inhaling toxic fumes. A respirator may be 
necessary in dusty environments or when spraying paint. Do not 
carry while painting.

 

Ŷ

Inspect product cords and hoses periodically and, if damaged, 
have them repaired at your nearest authorised service centre. 
Constantly stay aware of cord location. Following this rule will 
reduce the risk of electric shock or fire.

 

Ŷ

Never use an electrical adaptor with this grounded plug.

 

Ŷ

Check for damaged parts. Before further use of the air compressor 
or air tool, a guard or other part that is damaged should be 
carefully checked to determine that it will operate properly and 
perform its intended function. Check for alignment of moving 
parts, binding of moving parts, breakage of parts, mounting, 
and any other conditions that may affect its operation. A guard 
or other part that is damaged should be properly repaired or 
replaced by an authorised service centre. Following this rule will 
reduce the risk of serious injury.

 

Ŷ

Never store a tool with an air line connected. Storing the tool while 
connected to an air supply can result in unexpected operation, 
firing or movement and possible serious personal injury.

 

Ŷ

Protect your lungs. Wear a face or dust mask if the operation is 
dusty. Following this rule will reduce the risk of serious personal 
injury.

 

Ŷ

If the power supply cord is damaged, it must be replaced only by 
the manufacturer or by an authorised service centre to avoid risk.

 

Ŷ

Save these instructions. Refer to them frequently and use them 
to instruct others who may use this product. If you loan someone 
this product, loan them these instructions also.

 

Ŷ

The machine shall be connected to a circuit protection device 
(fuse or circuit breaker).

 

Ŷ

Operate the machine from the front of the control panel.

 

Ŷ

When the machine is in operation, many parts of machine may 
cause a high temperature. Use necessary personal protection 
equipment such as gloves to avoid injuries resulting from a high 
temperature.

 

Ŷ

When using the product with an extension cord, use a 3 x 1.5mm

2

 

heavy duty extension cord only.

 

Ŷ

This machine is not intended for use by persons (including 
children) with reduced physical, sensory or mental capabilities, or 
lack of experience and knowledge. Children should be supervised 
to ensure that they do not play with the machine.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still impossible 
to completely eliminate certain residual risk factors. The following 
hazards may arise and the operator should pay special attention to 
avoid the following:

Summary of Contents for AC3050B





















Reviews: