8. Unscrew the handle. On the opposite side
remove the hole covers by driving a 3-4
mm drift or drill into them.
Install the handle. Fit the handle on to the
opposite side by turning it on half circle.
Install the hole covers provided within the
accessory bag.
9. Put the cabinet in position.
WARNING!
Reposition, level the appliance, wait for at
least four hours and then connect it to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The edges of the doors run parallel to the side edge of the appliance.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
WARNING!
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of the gasket.
ENVIRONMENTAL CONCERNS
The symbol on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the shop where
you purchased the product.
180°
38
Environmental concerns
Summary of Contents for A72700GNW0
Page 79: ...79 ...
