AEG A62900GSB1, User Manual

Page: 18 / 24

FITTING THE DOOR HANDLES
1 2
4 3
(Example for right hinge performance)
The handles are supplied as a kit at deliv-
ery.
1. Screw the top handle bracket to the
handle rod.
2. Fit the bottom handle bracket on the
lower left-hand side of the door.
3. Fit the top handle bracket on the top
left-hand side of the door.
4. Screw the handle rod to the bottom
handle bracket.
Do not use excessive force and
overtighten the screws (max. 2
Nm) as you may damage the door
handles.
LEVELLING
When placing the appliance ensure that it
stands level. If necessary adjust the feet
using the adjustment spanner supplied.
Door alignment is dependent on proper
levelling.
DOOR REVERSIBILITY
1 2
To change the opening direction of the
door, do these steps:
• Remove the plug from the power.
• Remove the ventilation grille. Remove
the upper filling and install it on the op-
posite side of the grille.
• Remove the pedal hole cover and in-
stall the cover provided in the accesso-
ry bag on the opposite side.
• Lay down the appliance back side down
on a wooden support.
Remove the handle:
• Unscrew the handle from the top (1)
and the bottom (2) of the door.
• Unscrew both of the handle brackets
from the handle rod and re-screw the
handle brackets provided in the handle
kit.
18 www.aeg.com