background image

 Part number 20073, Rev 0 

 

 

 

 
 
 

 

 
 
 
 
 
 
 
 
 
 

UNDERCOUNTER BUILT IN PLUS SERIES FREEZERS 

SCUCBI-0420, SCUCBI-0420SS, SCUCBI-0420AD 

OWNER’S INSTRUCTIONS 

This manual describes how to operate and care for your appliance to get the best, most efficient, performance. 

READ THIS BOOK! 

Note to Customer: 

This  merchandise  was carefully packed and thoroughly inspected  before leaving our plant.  Responsibility for its 
safe  delivery  was  assumed  by  the  carrier  upon  acceptance  of  the  shipment.    As  directed  on  the  side  of  your 
packing carton, claims for loss or damage sustained in transit must be made on the carrier as follows: 
 
A.)

 

Visible Loss, Damage, Shortage External Evidence of Loss or Damage: 

This type of damage 

must

 be noted on 

the freight bill and acknowledged by the carrier’s agent (driver) at time of delivery. Make sure you get a signed 
copy. Send a written request for an inspection to the carrier.  

B.)

 

Concealed  Damage

:  This  type  of  damage  may  not  be  discovered  until  the  unit  is  being  unpacked.  When 

concealed  damage is discovered, stop unpacking immediately  and contact the carrier immediately to report 
the claim and request an inspection. This should be done as soon as possible and, in any case, must be done 
within 15 days or receiving the merchandise. If at all possible, do not  move the item and save all packaging 
material for carrier’s inspection.  

C.)

 

FAILURE  TO  FOLLOW  THESE  INSTRUCTIONS  MAY  RESULT  IN  THE  CARRIER  REFUSING  TO  HONOR  YOUR 
COMPANY’S  CLAIM.  UNDER  NO  CIRCUMSTANCES  SHOULD  THE  MERCHANDISE  BE  RETURNED  TO  THE 
MANUFACTURER. NO RETURNS WILL BE ACCEPTED WITHOUT PRIOR AUTHORIZATION. 

 
 

 

Horizon Scientific 

125 Varnfield Drive 
Summerville, SC 29483 
Phone:  800-648-4041 
Fax:      843-821-8051 

Warranty: 

Two-Year Parts and Labor 
5 Years Compressor Parts 

Revision Date 

08/23/2012 

 

 

 

 

 

Summary of Contents for SCUCBI-0420

















Reviews: