background image

18

When transporting batteries:

 

Ensure that battery contact terminals are protected and 

insulated to prevent short circuit.

 

Ensure that battery pack is secured against movement within 

packaging.

 

Do not transport batteries that are cracked or leak.

Check with forwarding company for further advice.

BATTERY PACK PROTECTION

The battery pack has overload protection that protects it from being 

overloaded and helps to ensure long life. Under extreme stress the 

battery electronics switch off the product automatically. To restart, 

switch the product off and then on again. If the product does not 

start up again, the battery pack may have discharged completely. In 

this case it must be recharged in the battery charger.

MAINTENANCE

The ventilation slots of the product must be kept clear at all times. 

Use only AEG accessories and AEG spare parts. Should 

components need to be replaced which have not been described, 

please contact one of our AEG service agents (see our list of 

guarantee/service addresses).

If needed, an exploded view of the product can be ordered. Please 

state the Article No. as well as the product type printed on the label 

and order the drawing at your local service agents or directly at:

 

WARNING! 

Avoid using solvents when cleaning plastic parts. 

Most plastics are susceptible to damage from various types of 

commercial solvents and may be damaged by their use. Use clean 

cloths to remove dirt, dust, oil, grease, etc.

 

WARNING! 

Do not at any time let brake fluids, gasoline, 

petroleum-based products, penetrating oils, etc., come in contact 

with plastic parts. Chemicals can damage, weaken or destroy plastic 

which could result in serious personal injury.

Techtronic Industries Australia Pty Ltd

PO Box 1065

 

Mount Waverley VIC 3149

 

Tel. no. 1300 234 797 

Australia

Techtronic Industries N.Z. Limited

PO Box 12-806

 

Penrose AUCKLAND 1642

 

Tel. no. 0800 234 797 (0800 AEGPWR)

 

New Zealand

SYMBOLS

Read the instructions carefully before starting the 

product.

CAUTION! WARNING! DANGER!

Remove the battery pack before starting any work on 

the product.

Wear eye protection.

Wear ear protectors.

Wear a suitable dust protection mask.

Wear protective gloves.

Accessory - Not included in standard equipment, 

available as an accessory.

Do not dispose of electric tools, batteries/rechargeable 

batteries together with household waste material. 

Electric tools and batteries that have reached the end 

of their life must be collected separately and returned 

to an environmentally compatible recycling facility. 

Check with your local authority or retailer for recycling 

advice and collection point.

No-load speed

V

Volts

min

-1

Revolutions or reciprocations per minute

Direct current

Regulatory Compliance Mark (RCM). Product meets 

applicable regulatory requirements.

Summary of Contents for A18SRADBL





















Reviews: