AEG A18FCN18GA, Original Instructions Manual

Page: 16 / 20

16
MAINTENANCE
Use only AEG accessories and spare parts. Should components
that have not been described need to be replaced, contact one
of our AEG service agents (see our list of guarantee/service
addresses).
If needed, an exploded view of the product can be ordered. State
the product type and the serial number printed on the label,
and order the drawing at your local service agents or directly
at: Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364
Winnenden, Germany.
SYMBOLS
Read the instructions carefully before starting the
product.
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any work on
the product.
Accessory - Not included in standard equipment,
available as an accessory.
Wear eye protectors.
Keep hands away.
Do not dispose of electric tools, batteries/rechargeable
batteries together with household waste material.
Electric tools and batteries that have reached the end
of their life must be collected separately and returned
to an environmentally compatible recycling facility.
Check with your local authority or retailer for recycling
advice and collection point.
No-load speed
V
Volts
Direct current
Regulatory Compliance Mark (RCM). Product
meets applicable regulatory requirements.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Product does nothing or
operates sluggishly
Inadequate lubrication.
Worn or damaged O-ring seals or bumper.
Exposure to low temperatures.
Exposure to high temperatures.
Contact Authorised Service Centre for tool
lubrication.
Contact Authorised Service Centre for repair.
Allow product to warm to proper operating
temperature.
Allow product to cool to proper operating
temperature.
Product jams frequently
Incorrect fasteners
Damaged fasteners
Loose magazine
Dirty magazine
Worn or damaged driver
Verify that fasteners are of the correct size.
Replace fasteners.
Tighten screws.
Clean magazine.
Contact Authorised Service Centre for repair.