Step 1
Turn off the oven and wait un-
til it is cold.
A
B
Step 2
Carefully pull the shelf sup-
ports up and out of the front
catch
A
.
Step 3
Pull the supports out of the
rear catch
B
.
Step 4
After the cleaning, install the
shelf supports in the opposite
sequence.
12.3
How to use: Aqua Clean
Step 1
Turn off the oven and wait until it is cold.
Step 2
Remove all accessories.
Step 3
Pour water into the cavity embossments: 400 ml.
Step 4
Set the cooking time for 25 min. Refer to "Clock functions" chapter, How to
set: Duration.
Step 5
Set the function:
.
Step 6
Set the temperature to 80 °C.
When the cleaning ends, the signal sounds.
12.4
How to remove and
install: Door
You can remove the door and the
internal glass panels to clean it.
CAUTION!
Carefully handle the glass,
especially around the edges
of the front panel. The glass
can break.
Step 1
Fully open the door.
Step 2
Insert the 2 pins into the open-
ings on the hinges.
Step 3
Close the oven door to the first opening position (approximately 30° angle).
Hold the door at both sides and pull it away from the oven at an upwards an-
gle. Put the door with the outer face down on a soft cloth on a stable surface.
ENGLISH
23
