AEG 68001K, Installation And Operating Instructions Manual

Page: 23 / 96

23
If you are unable to remedy the problem by following the above
suggestions, please contact your dealer or the Customer Care De-
partment.
1
Warning! Repairs to the appliance are only to be carried out by quali-
fied service engineers. Considerable danger to the user may result from
improper repairs.
3
If the appliance has been wrongly operated, the visit from the customer
service technician or dealer may not take place free of charge, even
during the warranty period.
Acoustic signal sounds and
appliance switches itself on
and then off again; after 5
seconds another acoustic
signal sounds The On/Off sensor field has
been covered up, e.g. by a
cloth Do not place any objects
on the control panel
Display is switching be-
tween two heat settings Power management is re-
ducing the power of this
cooking zone See the section “Switching
the power function on and
off”
f
flashes Unsuitable cookware Use suitable cookware
No cookware on the cook-
ing zone Place cookware on the
cooking zone
The diameter of the bot-
tom of the cookware is too
small for the cooking zone Move onto a smaller cook-
ing zone
Use suitable cookware
_
is lit Overheating protection for
the cooking zone has been
triggered Switch off the cooking
zone. Switch the cooking
zone on again
e
and number are dis-
played
Electronics fault Disconnect the appliance
from the electrical supply
for a few minutes (Take the
fuse out of the house’s
wiring system)
If after switching on again,
e
is displayed again, call
the customer service de-
partment