Symbol
Comment
5
-
Zone indicator
To show for which zone the slider is active.
6
-
To set the timer functions.
7
-
Slider
To adjust the heat setting.
8
PowerBoost
To activate the function.
9
Lock
To activate and deactivate the function.
10
Pause
To activate and deactivate the function.
11
0 - 9
-
To show the current heat setting.
12
Bridge
To activate and deactivate the function.
13
/
Signal indicators
Full connection / No signal. To show the signal strength of the
connection between the Food Sensor and the antenna.
4.3 Food Sensor
2
4
5
6
1
3
1
Measurement point
2
Minimum level mark
3
Recommended immersion range (for
liquids)
4
Calibration code
5
Hook for placing the Food Sensor on the
rim
6
Handle with antenna inside
The Food Sensor is a wireless temperature
probe operating without a battery, delivered
in a packaging with the hob. Inside its handle
there is an antenna. Another antenna is
located below the hob surface, in the area
between the two rear cooking zones. To
ensure proper communication between the
Food Sensor and the hob do not put anything
on the hob in this area.
The measurement point is located halfway
between the tip and the minimum level mark.
Insert the Food Sensor in the food at least up
to the minimum level mark. For liquids, to get
the best cooking results, immerse the Food
Sensor in the liquid 2-5 cm above the
minimum level mark. Place the Food Sensor
on the rim of the pot or pan by the hook;
close to the area with the antenna, at 1 - 3
o'clock position (for the left side of the hob) or
9 - 11 o'clock position (for the right side of the
hob).
The following indicators show the strength of
the connection between the hob and the
Food Sensor on the display: , , . If
the hob cannot establish the connection,
comes on. You can move the Food Sensor
along the rim of the pot to establish or
strengthen the connection. The hob
ENGLISH
9
Summary of Contents for 62 D4A 01 CA
Page 1: ...USER MANUAL EN User Manual Hob IAE84881FB ...
Page 31: ...31 ...
