17
D
GR
NL
F
GB
1. Before fi rst use.
Remove all adhesive
remains and gently rub with a
dampened cloth. Rinse water tank
to remove foreign particles. When
turned on for the fi rst time, temporary
vapours/odours may occur.
2. Filling steam iron with water.
Make sure plug is removed from
power outlet. Turn steam selector to
Dry setting and open fi lling aperture
cover. Using beaker provided, pour
water up to maximum level. Close
cover.
3. Plug power cable into a power
outlet
. Power indicator light turns
on. Set temperature by turning
temperature selector to adequate
choice. When the light turns off , iron is
ready to be used.
8 min
30 sec
30 sec
A
B
4. Using the spray mist and steam
jet function.
Ensure that water tank
is at least 1/4 full. Use spray mist to
pre-dampen fabrics by pressing spray
button several times to release a fi ne
mist (
A
). To use the steam jet function,
ensure that tank is at least 1/2 full.
Press steam jet button several times to
prime pump (
B
).
5. Steaming hanging items.
Vertical
steam jet function is ideal for steaming
curtains, suits and delicate fabrics.
Hang item on a hanger, hold iron at a
distance of 10–20 cm and press steam
jet button.
6. 3-way Auto-OFF.
If iron is left
unattended on soleplate or on the
side, it turns off after 30 seconds. If left
unattended on the heel, it turns off
after 8 minutes. To turn on, just begin
to iron again.
GB
Getting started
AEG IFU-Parana 5lang.indd 17
AEG IFU-Parana 5lang.indd 17
13.03.12 14:33
13.03.12 14:33