2
1
2.
Pull the rear end of the shelf support
away from the side wall and remove
it.
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
Valid with telescopic runners:
The retaining pins on the tele-
scopic shelf runners must point to
the front!
CAUTION!
Make sure that the longer fixing
wire is in the front. The ends of
the two wires must point to the
rear. Incorrect installation can
cause damage to the enamel.
CLEANING THE TOP OVEN
GLASS PANELS
The door glass on your product
can be different in type and shape
from what you see in diagrams.
The number of glasses can be dif-
ferent.
WARNING!
Make sure that the glass panels
are cool before you clean the
glass door. There is a risk that the
glass could break.
WARNING!
When the door glass panels are
damaged or have scratches, the
glass becomes weak and can
break. To prevent this, you must
replace them. For more instruc-
tions, contact your local Service
Centre.
1
2
1
Removing the glass:
1.
Open the door.
2.
Push the door trim at both sides to re-
lease the clips. Refer to the picture.
3.
Pull the door trim to the front to re-
move it.
4.
Remove the glass panels.
To install panels, do the above
steps in the opposite sequence.
ENGLISH
33
Summary of Contents for 49002VMN
Page 1: ...49002VMN EN COOKER USER MANUAL ...
Page 42: ...42 www aeg com ...
Page 43: ...ENGLISH 43 ...
