20
Introduction
Extractor version
●
The hood is supplied as an extractor unit and can also be
used with a filtering function by fitting activated carbon
filters (special accessory).
●
The unit features two outlet holes, one of which
A
is
located on the top of the unit while the other
B
is located
on the rear.
●
To connect up the hose, you should first fit the bayonet-
mounting flange
C
(Ø120 mm) on the outlet required (if
using the top outlet, fix the flange in place using the screw
supplied as shown in
Fig. 1
).
Close off the unused hole using the bayonet fitting caps
D
.
●
Important!
To use the back hole
B
, remove switch
F
from
the top hole. —
Fig 2.
2
A
B
F
1
A
D
B
C
D
B
A
C
